Otsingu tulemused

Moulded fibre parts - Import eksport

40 Ettevõtted

0 Tooted

TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Saksamaa

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Veebilehe
DIGEL STICKTECH GMBH U. CO KG

Saksamaa

Ettevõte DIGEL STICKTECH GMBH U. CO KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Optilised kiud tööstuses. See tegeleb ka Radiant heaters, Heating elements, Heating foils, heating mat, Carbon-fibre-reinforced plastics (CFRP), Floor heating pads, Electrical heating bands, Electric heat cushions, JA Electric blankets tööstustes. See asub Pfullingen, Saksamaa.
SKS METAPLAST SCHEFFER-KLUTE GMBH

Saksamaa

Ettevõte SKS METAPLAST SCHEFFER-KLUTE GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Plastmaterjalide töötlemine tööstuses. See tegeleb ka Liquid coolant couplings for motor vehicles, Assemblies for the automotive industry, Plastic assemblies, Plastic moulded parts, reinforced with glass fibre, plastic hoses, Plastic parts for the automotive industry, Plastics manufacturing, Assembly of plastic components, JA Extruded pipes tööstustes. See asub Sundern, Saksamaa.
TFP TECHNOLOGY GMBH

Saksamaa

Ettevõte TFP TECHNOLOGY GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Tehnilised tekstiilid tööstuses. See tegeleb ka Scrims made of technical fibres, Carbon-fibre reinforced plastic semi-finished products, Preforms, textile, Semi-finished products from fibre composites, Carbon-fibre-reinforced plastics (CFRP), Products made from fibre composite materials, Fibre composite materials, Carbon fibre components, JA Sensors, intelligent tööstustes. See asub Falkenstein, Saksamaa.
HA-WI KUNSTSTOFFE GMBH & CO. KG

Saksamaa

Ettevõte HA-WI KUNSTSTOFFE GMBH & CO. KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Tööstuslikud plasttooted tööstuses. See tegeleb ka Coat racks, Plastic cover caps, Plastic spacers, Injection-moulded plastic parts, Plastic threaded plugs, Plastic edge protection profiles for packaging purposes, Plastic moulded parts, Plastic moulded parts, reinforced with glass fibre, JA Plastic moulded parts, customer-specific tööstustes. See asub Bad Laasphe, Saksamaa.

Lehekülg teie ärile

Kas näete seda? Teie potentsiaalsed kliendid näevad samuti Liituge meiega ja tehke ennast europages'is nähtavaks.

Lisa minu äri

MPI EUROPE GMBH

Saksamaa

Ettevõte MPI EUROPE GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Kummi ja plasti pritsevormimine tööstuses. See tegeleb ka Molded plastic parts, Plastic injection-moulded parts for the automotive industry, Plastic injection-moulded parts for medical technology, Plastic injection-moulded parts for small batches, Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Injection-moulded parts, technical, Plastic moulded parts, reinforced with glass fibre, JA Plastic components for medical technology tööstustes. See asub Doebeln, Saksamaa.
WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU

Saksamaa

Ettevõte WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU, on Valmistaja/ Tootja, aastal ja mis tegeleb Plastmaterjalide töötlemine tööstuses. See tegeleb ka Assembly of plastic components, Plastics manufacturing, Plastic surfaces, In-mould decoration (IMD), injection moulding, Plastic injection parts, Plastic assemblies, Injection moulded plastic parts with metal insert, JA Plastic moulded parts, reinforced with glass fibre tööstustes. See asub Dillenburg, Saksamaa.
ACS

Prantsusmaa

Ettevõte ACS, on Valmistaja/ Tootja, aastal ja mis tegeleb Tööstuskonsultandid tööstuses. See tegeleb ka composite material design office, composite part bespoke moulding, Moulding of polyester parts, JA carbon fibre part moulding tööstustes. See asub Saint Sulpice De Royan, Prantsusmaa.
JUNO COMPOSITES LTD

Iirimaa

Ettevõte JUNO COMPOSITES LTD, on Valmistaja/ Tootja, aastal ja mis tegeleb Klaaskiud ja -vill tööstuses. See tegeleb ka carbon fibre part moulding, carbon fibre fabrics, carbon fibres, JA recycling of carbon fibres tööstustes. See asub Emyvale, Iirimaa.
FAVER SRL

Itaalia

Ettevõte FAVER SRL, on Valmistaja/ Tootja, aastal ja mis tegeleb Hüdropressid tööstuses. See tegeleb ka industrial automations, carbon fibre part moulding, Carbon fibre components, JA composite materials with resins tööstustes. See asub Soave, Itaalia.

EXTREMECARBON, LDA

Portugal

Ettevõte EXTREMECARBON, LDA, on Valmistaja/ Tootja, aastal ja mis tegeleb Mootorrataste varuosad ja tarvikud tööstuses. See tegeleb ka Motospordivarustus ja -tarvikud, 3D skänner, Motospordivarustus ja -tarvikud, Carbon fibre components, carbon fibre part moulding, JA 3D skänner tööstustes. See asub Melres, Portugal.
CONEC ELEKTRONISCHE BAUELEMENTE GMBH

Saksamaa

CONEC Elektronische Bauelemente GmbH is an efficient manufacturer of high-quality connectors, patch cable and single ended cable as well as enclosure technology. CONEC products are used in automation, telecommunications and energy technology, machine manufacturing, agriculture and medical technology, transportation and the aviation industry. The headquarters in Lippstadt has a large research and development department, its own tool-making department, a CNC-turning department and a synthetics injection moulding plant. As part of the Amphenol Group, CONEC participates in the growth and development opportunities of a globally active group and at the same time acts flexibly and quickly as a medium-sized company in order to optimally adapt to changing customer needs. CONEC is a global player with its own subsidiaries and/or production sites in Canada, the USA, China, the Czech Republic, Poland and France. The product portfolio includes connectors of the following categories: • D-SUB/IP67 D-SUB Connectors • IP67 RJ45 / USB / Mini USB / Fiber Optic LC Duplex • CONEC Hybrid Connectors • Connectors for agricultural and construction machines • Circular Connectors • PCB Connectors • Customer specific solutions The company’s quality management ensures high quality by applying the international standards DIN EN ISO 9001. Depending on the product family, CONEC industrial connectors are tested and approved in accordance with UL, CSA or VDE.

Veebilehe

PROGRESS SILICONES

Prantsusmaa

PROGRESS SILICONES has been specialised in the manufacture of silicone parts and other elastomers for industry and the medical sector since 1985. PROGRESS SILICONES designs, manufactures and sells silicone parts for the most demanding industries. Sectors, such as: the food industry, nuclear power, cosmetics, aeronautics, pharmaceuticals and biomedical. From single parts to mass production, we create all types of moulded parts, overmoulding, extrusion, co-extrusion, manufacturing and cutting. All our production can be associated with specific marking and packing operations, according to your specifications. We are equipped with 2 Clean Rooms covering 550 m2 classed ISO 7 and ISO 8, adapted to the manufacture of medical and pharmaceutical products. Our quality management system is ISO 9001 and ISO 13485 certified.

Veebilehe
WILHELM-PLASTIC GMBH & CO KG

Saksamaa

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Veebilehe
LÖSCH GMBH

Saksamaa

At Lösch we pride ourselves on rising to every challenge. Nothing motivates us more than an unfinished project still waiting for the perfect solution. We firmly believe that virtually nothing is impossible. It is this belief that has made us industry experts internationally recognised for our quality standards. And that is all down to our workforce, who make Lösch what it is today. Their inventive flair, their engineering prowess and their belief that only the best will do are integral to our everyday corporate culture. Top service calls for a clear focus. And because we know the raw materials, the process and our machinery inside and out, we can keep redefining the boundaries of what is achievable. The underlying principle of everything we do is a clear understanding of our customers and their industry.

Veebilehe
REICH MIM GMBH

Saksamaa

The expertise of Reich MIM GmbH is the production of metal injection moulded parts, or MIM for short. Reich MIM GmbH is located in Schwarzenberg in the German federal state of Saxony. With over 40 employees and a production area of approx. 2200 m², Reich MIM GmbH is a medium-sized company that is entirely family-owned. MIM technology is suitable for components with a high degree of shape complexity that are to be produced without reworking (undercuts, threads). The main areas of application are automotive and mechanical engineering, measurement and control technology, precision mechanics, the lock and fittings industry, tool technology, medical technology and the field of household appliances.

Veebilehe
GW BATTERIEN GMBH

Saksamaa

As an innovative and flexible company, not only do we develop, build and supply battery systems using NiCd, lead and Li-ion technology, we also solve problems for a wide range of applications in the area of railway vehicle batteries and stationary battery systems. In combination with our extensive services, from reconditioning, storage and repairs through to customised leasing offers, we can assist you with our expertise. Our product range is rounded off by special innovations, including those in areas other than battery technology.

Veebilehe
SCHAUENBURG INDUSTRIETECHNIK GMBH

Saksamaa

Schauenburg Industrietechnik GmbH, based in Nuremberg, is part of the globally active SCHAUENBURG INTERNATIONAL group of companies. The company's services are used by the automotive industry, the construction industry, mechanical engineers and producers in the household appliance sector. As an internationally recognised development and production partner, the company produces plastic and rubber moulded parts from drawings. The portfolio is rounded off by hoses, stamped parts and profiles. One particular advantage of the company is that it produces its own plastic moulded parts. Fully automated 24/7 production guarantees maximum efficiency for small and large-scale production alike. The company specialises in ultra-small moulded parts, measuring less than 10 mm. The variety of products offered is also matched by the scope of the logistics service: Tailored solutions in C-parts management and kanban highlight the importance placed on customer orientation and performing in line with the market. Schauenburg Industrietechnik GmbH is certified to DIN EN ISO 9001 standard

Veebilehe
BECHTOLD & SOHN GMBH & CO. KG

Saksamaa

A name that has sounded good since 1885. It is not a sheer coincidence that Bechtold & Sohn can look back on a long and successful history. Now in its fourth generation, the family-run company will continue to remain on course with the same values held by master woodturner Johann Peter Bechtold when he founded his company back in 1885: Quality, continuity, personality and dedication. These virtues form the cornerstone of the company philosophy and have enabled Wolfgang Bechtold and his 150 employees to gain an excellent reputation among industrial companies, predominantly in the fields of pharmaceuticals, medicine and chemistry. Enthusiasm for plastic and technology Plastic has been the material of choice at Bechtold & Sohn for more than five decades now. This results in an enormous wealth of experience which our highly skilled employees use to produce plastic parts for well-known customers in three-shift operation.

Veebilehe
WALDKRAFT GMBH - BÜRSTEN- UND KUNSTSTOFFTECHNIK

Saksamaa

Waldkraft GmbH, founded by Knotz Bürsten GmbH, has been producing wooden and plastic brushes and injection moulding products of all kinds for over six decades to the satisfaction of its customers. As an independent family business, we are characterized by our commitment to our business partners and employees. The high quality standards of our products are at the heart of what we do. The versatility of our products stands us out from the crowd. The benchmark for this is the requirements of our customers. We believe the customer is king. To achieve these goals, it is key that our employees are motivated, highly trained and satisfied. We also feel a responsibility to our environment. Therefore, we use our wood waste as a heating medium for our factory. Furthermore, we use 100% natural energy sources for production.

Veebilehe

BIO-RAD - ÉTABLISSEMENT DE GÉMENOS (ANCIENNEMENT PLASTIFRANCE)

Prantsusmaa

For over 60 years Plastifrance has designed, manufactured and sold plastic components for aeronautics, medicine, the car industry, etc. Our values are industrial excellence, quality service and innovation for parts perfectly suited to your applications. We manufacture plastic components by injection (plastic stops, plastic caps, sleeves and covers) to protect your parts during transport, surface treatment and finish (handles, nozzles …) and wiring management (cable glands, grommets, covers, clips and rivets…).

Veebilehe
PLS GMBH

Saksamaa

The top objective of our company is to make our customers happy. This means that we must recognise their needs, satisfy their requirements and exceed their expectations. In addition to a high product quality, the range of services offered is an important criterion for many customers. This is why we have striven right from the start to set up our departments in such a way that they complement each other. The collaboration between our mould construction, injection moulding, industrial assembly, quality assurance and post-processing departments allow us to cater expertly and very flexibly to the wishes of our customers. The prerequisite for this is communication. We need information to be able to offer an optimum product. This is why we consider feedback of any kind as important information for continuous improvement and further development. This is a cornerstone of our company's success.

Veebilehe
SAXONIA-FRANKE GMBH & CO. KG

Saksamaa

As a quality-conscious family business, SAXONIA-FRANKE supports its customers in all areas relating to stamping and forming technology, plastic injection-moulding technology and assembly installation. The company was founded in 1981 by Jörg Franke in Göppingen. The opportunity to move into a new, larger production building arose as early as 1987. Over the following years, extensions were built repeatedly, in order to cope with the constantly increasing order development in the company. In 2016, a new logistics centre was inaugurated. This measure allowed the production area to be expanded. Back in 2011, a generational change was introduced, and Felix Franke entered the management. Our success is based on innovation and drive, as well as a continuous commitment to quality and delivery reliability. This is ensured through qualified employees, through the use of the latest technology for machinery and through a uniform and sustainable concept for the implementation of tasks put forward by the customer. It's important to us here that the quality and economy of our work and products are closely linked with responsibility for the environment and society. Our integrated management system includes quality, environmental, work and health management. We are certified in line with ISO TS 16949, ISO 9001, ISO 14001, EMAS III and OSHAS, and are practitioners of the German Sustainability Code.

Veebilehe
LOUVRETTE GMBH VERPACKUNG + DESIGN

Saksamaa

LOUVRETTE has specialised in the development and production of top-quality plastic packaging solutions for the cosmetics industry for more than half a century.

Veebilehe
WINDUS ENTERPRISES INC.

Hiina

Founded in 1998, WINDUS stands as a global OEM/ODM powerhouse, delivering excellence in castings, metal stampings, fabricated and machined parts, as well as assemblies and testing across diverse industries like Water Treatment, Agriculture, Offshore Oil, Construction, Railroad, and Automotive. Our commitment to quality is evident through our ISO9001 accreditation by TUV in 2003. Implementing an ERP system and Office Automation system has streamlined our business and workflow, significantly boosting internal efficiency and customer responsiveness. Rigorous inspection requirements are meticulously recorded in our Quality Information System, empowering us to measure performance and continually enhance our services. Backed by a seasoned engineering and service team, WINDUS is your 'one-stop service' provider. From design assistance and 3D rapid prototyping to production methods, engineering, and project management, we offer a comprehensive suite of services. Embracing flexible business approaches such as Kanban and Consignment, we cater to your unique needs. Over the years, our unwavering commitment to quality and value has earned us accolades from customers, industry associations, and communities alike.

Veebilehe
ACKOR MOULD LIMITED

Hiina

Founded in Dongguan, China, in 2003, Ackor Mould Limited has dedicated the past two decades to collaborating closely with customers to provide optimal solutions for injection tools and molding products. Our comprehensive services encompass everything from mold manufacturing and injection molding production to final product assembly. Key markets include Japan, the EU, and America, where we've established robust partnerships due to the trust bestowed upon us by our valued customers. With extensive experience spanning various industries such as automotive, medical, electronics, cosmetics, and electrical, Ackor Mould Limited has emerged as a trusted provider. Our proficiency extends beyond injection tooling to services like CNC machining, Silicone Moulding, Rubber Moulding, Metal Pressing, and Plastic Vacuum Forming. From humble beginnings, Ackor Mould Limited has grown substantially by adhering to core principles of quality and competitive pricing. Our commitment is evident in our relentless pursuit of meeting customer requirements and delivering cost-effective products of the highest standards, from the initial inquiry through production to timely delivery. Specializing in injection mold toolmaking for over two decades, Ackor Mould has earned a stellar reputation in the domestic and overseas injection tooling industry. Our expertise is showcased in the diverse sectors we serve, including automotive, medical, electronics, cosmetics, and electrical.

Veebilehe
N&H TECHNOLOGY GMBH

Saksamaa

Ettevõte N&H TECHNOLOGY GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Plastmaterjalide töötlemine tööstuses. See tegeleb ka Data transmission cables, specially prepared, Membrane keyboards (complete solutions), Rubber precision moulded parts, Plastic moulded parts, Plastic moulded parts, customer-specific, Plastic Housings, Assemblies, electromechanical, Push buttons (switches), JA Spring contacts tööstustes. See asub Willich, Saksamaa.
BORFLEX SERVICES

Prantsusmaa

Ettevõte BORFLEX SERVICES, on Valmistaja/ Tootja, aastal ja mis tegeleb Kummi ja plasti töötlemine tööstuses. See tegeleb ka Tihendid, Custom elastomer parts, Custom composite parts, Moulded composite parts, Extrudes joints, Moulded rubber parts, Moulded polyurethane parts, Rubber sleeves, JA Pultruded composite profiles tööstustes. See asub St-Étienne-Rouvray, Prantsusmaa.
FONDERIE PENA

Prantsusmaa

Ettevõte FONDERIE PENA, on Valmistaja/ Tootja, aastal ja mis tegeleb Terasevalu tööstuses. See tegeleb ka Eri- ja kõrgtugevad valuterased, Spetsiaalteras, light alloy foundries, casting of non ferrous metals, Eri- ja kõrgtugevad valuterased, sand casting, aluminium moulding, wood model modelling, JA Bronze foundry tööstustes. See asub Mérignac, Prantsusmaa.
LARKIS SP. Z O.O.

Poola

Ettevõte LARKIS SP. Z O.O., on Valmistaja/ Tootja, aastal ja mis tegeleb Tihendid tööstuses. See tegeleb ka Kummitooted, Kummi ja plasti pritsevormimine, gaskets, profiles, Gaskets and seals, Injection moulding, Kummitooted, Kummi ja plasti pritsevormimine, JA Moulded rubber parts tööstustes. See asub Dobczyce, Poola.