Otsingu tulemused

Alloyed

222 Ettevõtted

0 Tooted

CHR. HÖVER & SOHN GMBH & CO KG

Saksamaa

For over 80 years, Höver & Sohn has stood for unrivalled quality. Yet this does not mean that we're beating the same old drum even now – the fire of passion for stainless steel is still part of our philosophy. Traditional values meet modern CNC technology: This combination guarantees quality that "just makes you happy". We are experienced and motivated, traditional and modern, committed and ready to meet your requirements. Chr. Höver & Sohn GmbH & Co. KG enjoys a worldwide reputation of providing the highest quality and reliability. At Höver, quality is not just a written word, but a universal principle of incorporating company culture in real life. As an independent specialist department, quality assurance is directly bound to company management from an organisational point of view. To Höver, quality without compromises down to the finest detail is a must. Quality and safety are integral parts of our company's philosophy.

Veebilehe
HORST PIELHAU GMBH & CO. KG

Saksamaa

Ettevõte HORST PIELHAU GMBH & CO. KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Alumiiniumvalukojad tööstuses. See tegeleb ka Alumiiniumsulamid, aluminium die-casting, Aluminium casting, pressure moulding, aluminium, Aluminium machining, aluminium injection, Alumiiniumsulamid, JA Aluminium/light metal processing tööstustes. See asub Lüdenscheid, Saksamaa.
WESTFALENZINN J. JOST KG

Saksamaa

Ettevõte WESTFALENZINN J. JOST KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Kõvajoodisega jootmine - teras ja metall tööstuses. See tegeleb ka Plii ja pliisulamid, Tina ja tinasulamid, Tsink ja tsingisulamid, Tinasulamid, Plii ja pliisulamid, Tina ja tinasulamid, Tsink ja tsingisulamid, Anodes, JA Soft solders tööstustes. See asub Sundern, Saksamaa.
RISSE + WILKE KALTBAND GMBH & CO. KG

Saksamaa

Ettevõte RISSE + WILKE KALTBAND GMBH & CO. KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Külmvaltsitud teraslatid tööstuses. See tegeleb ka Cold-rolled strips, Steel strips, Steel coils, Spring steels, Micro-alloyed cold-rolled strips, High-strength micro-alloyed fine-grained steels, Quenched and tempered steels, Boron-alloyed, JA Deep-drawing grades tööstustes. See asub Iserlohn, Saksamaa.
COURS GMBH & CO. KG

Saksamaa

Ettevõte COURS GMBH & CO. KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Pinnatöötlus ja pindamine - teras ja metall tööstuses. See tegeleb ka Galvaniseerimine - teras ja metall, Galvaniseerimine - teras ja metall, alloys, nickel, JA coatings tööstustes. See asub Velbert, Saksamaa.

Lehekülg teie ärile

Kas näete seda? Teie potentsiaalsed kliendid näevad samuti Liituge meiega ja tehke ennast europages'is nähtavaks.

Lisa minu äri

SCHMALE & SCHULTE GMBH

Saksamaa

Our company was founded in 1954. In the early days of the company, fittings were produced by aluminium chill casting. At the start of the 1980s, zinc die-casting became an established part of production. Shortly afterwards, production was expanded to include the field of aluminium die-casting. Our successful company development is still shaped by a balanced relationship between tradition and progress. Today, we supply our discerning customer base across Europe – in industrial and medical technology, mechanical engineering and the automotive, construction and furniture industries – with products made by aluminium die-casting, zinc die-casting and aluminium chill casting. With our core competence in the areas of aluminium and zinc die-casting, as well as aluminium chill casting, our customers receive daily support in producing and supplying ready-to-install casting components.

Veebilehe
MARTINREA HONSEL GERMANY GMBH

Saksamaa

Martinrea Honsel is a leading global supplier of light metal products, primarily for the automotive industry. The company produces aluminium components for the engine, transmission, chassis and body of cars and commercial vehicles, as well as for mechanical engineering and other applications using all common casting and rolling production processes. Components from the company reduce vehicle weight, fuel consumption and emissions, and make a significant contribution to environmental protection. Today, Martinrea Honsel employs around 4100 people in 13 plants across five countries. The rolling mill in Meschede is known worldwide as a supplier of aluminium surfaces in the area of bright and anodised materials as well as aluminium plates and rounds. The products are used in exterior components and interior fittings for cars and commercial vehicles, as well as in machine and plant construction, decorative front panels for furniture, suitcases, reflectors for lights, cosmetics packaging and much more. As a niche and specialist producer of high-quality semi-finished rolled products and stamped blanks, the development expertise practised with customers over many years is one of the company's strengths. Within the scope of product development, individual solutions are developed together with the customer, e.g. special material properties, special dimensional accuracy and customer-specific surface requirements for series application. If you have any questions, please feel free to contact us at any time.

Veebilehe
EZM EDELSTAHLZIEHEREI MARK GMBH

Saksamaa

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Veebilehe
FLENDER-STAHL GMBH & CO KG

Saksamaa

We are your steel supplier from Sauerland. Flender has a grassroots company philosophy, as is normal in Sauerland, based on four cornerstones: We are flexible, extraordinary, quick and reliable. We are happy to be measured on the basis of these attributes. Our particular strengths are in small quantities of hardened and non-hardened spring steel and in micro-alloyed steel strips. With our large warehouse capacity and short delivery times, Flender-Stahl is a reliable partner for a large number of regular customers in Germany and Europe. One issue that is frequently neglected is material that you no longer need! If you need more space in your warehouse, Flender-Stahl purchases coilwares and sheet steel, freeing up valuable warehouse space and providing you with hard cash. Simply inform us about your excess stock and we will be happy to present you with an interesting offer. Our products include: Cold-rolled steel strips, hot-rolled steel strips, engineering steel, case hardening steel and spring steel strips

Veebilehe
HUGO ARENS GMBH & CO. KG

Saksamaa

We are experts in the development and production of cast aluminium parts. Our Arens tubular fittings are highly versatile and have set new standards in quality and design. Our RoHS and REACH compliant products are manufactured in Iserlohn, Germany, with an in-house quality management system in place. Our customers include leading businesses from the most varied of industries worldwide. We are also happy to develop individual solutions and custom products for you. Simple assembly in no time. The Arens tubular fittings are easily installed without the need for welding or special tools to create railings for machinery or work platforms, for instance, or as hand rails and poles in buses and trains. Our products provide support. We manufacture all our products using high-quality DIN-standard aluminium alloys which provide maximum stability and resistant to corrosion while remaining lightweight.

Veebilehe

ENERGIETECHNIK ESSEN GMBH

Saksamaa

Energietechnik Essen GmbH – a member of the Georgsmarienhütte Group – bases its capabilities and skills on continuous research and development as well as on experience reaching back to 1811. The Energietechnik Essen GmbH develops, produces and supplies safety-relevant high-tech products, mainly for manufacturers of power generation machinery. When the first turbo-generator was built at the start of the 20th century, the Essen-based company supplied the retaining rings. Retaining rings are placed on the ends of the rotors to fix the copper coil against the centrifugal forces created by the high rotational speeds. The oldest documents in the company's archive relating to non-magnetisable retaining rings date back to 1901. Energietechnik Essen GmbH uses two remelting units, one electroslag remelting unit and one pressurised electroslag remelting unit, to produce the materials for retaining rings.

Veebilehe
WERNER KEMMINER GMBH

Saksamaa

We are a company in the metalworking industry and have specialised in the manufacture of flanges/flange rings, circlips, collars and bands/round plates since the beginning of the 1960s. So that we can process orders as quickly as possible, in addition to two-part circlips for 1 mm and for 2-3 mm piping, we permanently stock over 100, 000 flange rings in accordance with EN 12220 (Edition 06/98), DIN 24154 (Edition 07/66) Series 2-5, as well as flange rings in accordance with DIN 24154 (Edition 07/90) Part I+II in rough, galvanised and stainless steel versions (material 1.4301, 1.4541, 1.4571). Our highly flexible production lines mean that we can manufacture flange rings with special dimensions to order quickly, precisely and cost-effectively. We are happy to provide you with an individual quote. Reliability, flexibility and high quality. Qualities that our customers both within Germany and abroad have valued highly for decades.

Veebilehe

OTTO JUNKER CM GMBH

Saksamaa

The Otto Junker high-grade steel foundry in Lammersdorf, Simerath (20 km south of Aachen), specialises in special alloys. Our range of materials offers customers a wide selection of high-alloy iron-, nickel- and cobalt-based varieties. These materials are melted in highly efficient induction ovens, using vacuum technology where required. Our range of products includes corrosion-resistant alloys, heat-resistant alloys, non-magnetisable alloys, hard-wearing alloys and multiple special nickel- and cobalt-based alloys. We also make cast ferrous materials designed to handle exceptionally high levels of stress corrosion from JUNKERALLOY® nickel-based alloys. We have been producing and supplying many of these materials for decades. We produce more materials than are shown on our website – about 100 varieties in total.

Veebilehe
KB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES

Saksamaa

KB Schmiedetechnik GmbH is a highly certified West German drop forge - forgings of all steel grades, including duplex, titanium, nickel-based superalloys like Monel® or Hastelloy®, Incoloy®, Inconel® – up to 130Kg unit weight. We are a drop forge in Hagen (Westphalia), located between the historic “blade & metal" region Solingen and the “soccer city” Dortmund, specializing in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades and alloys according to following certifications, specifications, and standards: pressure equipment: valves, boiler systems, piping PED 2014/68/EU, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering American Bureau of Shipping (ABS) Bureau Veritas Marine & Offshore (BV) Det Norske Veritas (DNV) Lloyds Register (LR) Nippon Kaiji Kyōkai (ClassNK) Examples are forged components and equipment like brackets, holders, chain links, hoists, lifting hooks, fasteners, pipe connections, pressure-bearing parts, parts for valves like bodies, tube connectors like fittings, flanges and manifolds or pressurized parts for boiler systems like nozzles or headers/ caps, parts and pieces for wagon construction like articulation sockets or plates for buffer systems, parts for special vehicles, weapons, military and more.

Veebilehe
ALUMINIUMWERK UNNA AG

Saksamaa

Ettevõte ALUMINIUMWERK UNNA AG, on Valmistaja/ Tootja, aastal ja mis tegeleb Värvilisest metallist profiil tööstuses. See tegeleb ka Alumiiniumtorud, Alumiinium ja alumiiniumsulamid, Värvilisest metallist profiil ja vardad, aluminium profiles, aluminium pipes, Pressed aluminium tubes, Seamless aluminium tubes, aluminium rods, JA Aluminium billets tööstustes. See asub Unna, Saksamaa.
GRILLO-WERKE AG GESCHÄFTSBEREICH METALL

Saksamaa

Ettevõte GRILLO-WERKE AG GESCHÄFTSBEREICH METALL, on Valmistaja/ Tootja, aastal ja mis tegeleb Tsink ja tsingisulamid tööstuses. See asub Duisburg, Saksamaa.
EXALPRO GMBH

Saksamaa

Ettevõte EXALPRO GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Alumiinium ja alumiiniumsulamid tööstuses. See asub Langenfeld, Saksamaa.
FETRA ALUMINIUM PROFILTECHNIK GMBH

Saksamaa

Ettevõte FETRA ALUMINIUM PROFILTECHNIK GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Alumiinium ja alumiiniumsulamid tööstuses. See asub Solingen, Saksamaa.
KMD CONNECTORS STOLBERG GMBH

Saksamaa

Ettevõte KMD CONNECTORS STOLBERG GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Värviliste metaalide maagid tööstuses. See tegeleb ka copper alloys, brass tapes, bronze strips, Non-ferrous metals, Galvanising plant, High-performance alloys, copper strips, High-performance strips, JA Tin-plated strip tööstustes. See asub Stolberg, Saksamaa.
KARL KALDENBERG GMBH & CO. KG

Saksamaa

Ettevõte KARL KALDENBERG GMBH & CO. KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Terasevalu tööstuses. See tegeleb ka Aluminium casting, Machining, mechanical, of aluminium parts, Bronze casting, Moulded casting, shell mold casting, Synthetic casting, Aluminium alloy casting, Light metal chill casting, JA Brass casting tööstustes. See asub Heiligenhaus, Saksamaa.

DIPL.-ING. HERWIG GMBH

Saksamaa

Ettevõte DIPL.-ING. HERWIG GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Tsink ja tsingisulamid tööstuses. See tegeleb ka Hot galvanising, Hot galvanising shop, degreasing, Inhibitors, Flux, Ferrokill, Wetting agents, Protectors, JA Zinc alloy tööstustes. See asub Hagen, Saksamaa.
LASERTECHNIK WÜNSCH

Saksamaa

Ettevõte LASERTECHNIK WÜNSCH, on Valmistaja/ Tootja, aastal ja mis tegeleb Tööstuslikud lehtmetalltööd tööstuses. See tegeleb ka Lõikamine - teras ja metal, Kurrutamine - teras ja metall, Terase ja metalli töötlemine, Vask ja vasesulamid, CNC bending parts, aerospace part, Metal precision parts, Assemblies for laser technology, JA Lõikamine - teras ja metal tööstustes. See asub Unna, Saksamaa.
WALTHER WINKEMANN METALLWARENFABRIK GMBH & CO KG

Saksamaa

Ettevõte WALTHER WINKEMANN METALLWARENFABRIK GMBH & CO KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Treimine - teras ja metall tööstuses. See tegeleb ka Automatic turned parts, CNC turned parts, threaded rods, Aluminium turned parts, Locking screws, Soap dispensers, Special turned parts, Threaded rods, JA Screws, turned tööstustes. See asub Plettenberg, Saksamaa.
WESTFÄLISCHE DRAHTINDUSTRIE GMBH

Saksamaa

Ettevõte WESTFÄLISCHE DRAHTINDUSTRIE GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Teras tööstuses. See tegeleb ka Alumiiniumtraadid ja -kaablid, Konstruktsiooniteras, Tööriistateras, Bright steel, Wire rods for springs, Wire rods for ropes, free-cutting steels, steel wires, JA aluminium wire tööstustes. See asub Hamm, Saksamaa.
PETERSEIM GMBH & CO. KG METALLWERKE

Saksamaa

Ettevõte PETERSEIM GMBH & CO. KG METALLWERKE, on Valmistaja/ Tootja, aastal ja mis tegeleb Alumiinium ja alumiiniumsulamid tööstuses. See asub Olpe, Saksamaa.
SANDER DRUCKGUSS

Saksamaa

Ettevõte SANDER DRUCKGUSS, on Valmistaja/ Tootja, aastal ja mis tegeleb Alumiinium ja alumiiniumsulamid tööstuses. See tegeleb ka pressure moulding, aluminium die-casting, JA foundry tööstustes. See asub Nordrhein-Westfalen-Ennepetal, Saksamaa.
CONAL GMBH

Saksamaa

Ettevõte CONAL GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Alumiinium ja alumiiniumsulamid tööstuses. See asub Hüllhorst, Saksamaa.
J. C. KÖNIG STIFTUNG & CO KG

Saksamaa

Ettevõte J. C. KÖNIG STIFTUNG & CO KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Noolutamine - teras ja metall tööstuses. See tegeleb ka deep-drawn metal parts, non-ferrous metals and alloys, drawn copper products, JA Stainless steels tööstustes. See asub Solingen, Saksamaa.
MAGONTEC GMBH

Saksamaa

Ettevõte MAGONTEC GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Korrosioonivastased kemikaalid tööstuses. See tegeleb ka magnesium alloys tööstustes. See asub Bottrop, Saksamaa.
PROTOCAST GMBH

Saksamaa

Ettevõte PROTOCAST GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Teras tööstuses. See tegeleb ka Alumiinium ja alumiiniumsulamid, Alumiiniumvalukojad, Plastist kodutarbed, Plastpakendid, Alumiinium ja alumiiniumsulamid, Alumiiniumvalukojad, Plastist kodutarbed, JA Plastpakendid tööstustes. See asub Remscheid, Saksamaa.