Otsingu tulemused

Medical process - Valmistaja Tootja - Saksamaa

10 Ettevõtted

0 Tooted

WILOFA DIAMANT WILLI LOHMANN GMBH & CO. KG

Saksamaa

WILOFA DIAMANT Willi Lohmann GmbH & Co. KG has been your partner for sapphire and diamond coatings for over 50 years. Our diverse range of products includes the following areas: Special coatings/diamond coatings for industrial applications (e.g. in mechanical engineering, manicures and pedicures, ceramics and glass processing, plastics processing, medical technology, the jewellery industry and the printing industry). We offer solutions for a wide range of challenges in the areas of gripping, holding, grinding, setting, removing material, rounding off bristles, pipe clamping, etc. We produce diamond-coated dental instruments (FG diamond instruments, HP laboratory instruments, diamond discs, etc.) and sapphire nail files. Our sapphire nail files are made of spring steel and coated with sapphires of different grain sizes.

Veebilehe
HNP MIKROSYSTEME GMBH

Saksamaa

precise pumps – smart solutions HNP Mikrosysteme develops, manufactures and markets pumps worldwide. These micro annular gear pumps (mzr®-pumps) are used where fast and highly precise dosage is required. Five pump series enable: - a minimum dosage volume of 0.25 µl - a flow rate range from 1 µl/h to 1152 ml/min - pressure up to 150 bar These pumps stand out for their pulseless delivery, minimal dead volume, long service life, small dimensions, highly resistant materials and ease of maintenance. Furthermore, we offer individual application advice as well as filling and dosing systems for the following areas: - mechanical and plant engineering - chemical and pharmaceutical process engineering - medical and analytical instrumentation Every metering application brings new challenges. We look forward to your inquiry and will thoroughly discuss your application as well as advise you in detail regarding pumps, systems, filters, controls, sensors and much more. HNPM is based in Schwerin (in the North of Germany). Round about 90 employees work in construction, development, quality assurance and assembly or at our technical sales team, consisting of engineers and scientists.

Veebilehe
MICRO-EPSILON

Saksamaa

Ettevõte MICRO-EPSILON, on Valmistaja/ Tootja, aastal ja mis tegeleb Mõõtmine – aparaadid ja instrumendid tööstuses. See tegeleb ka Asendi- ja kaugusemõõtmisseadmed ja -instrumendid, Tootmisprotsessi jälgimise süsteemid, Colour analysers and sensors, laser meters, Profile measuring instruments, capacity sensors (CTS), pyrometers, Thickness measurement equipment, JA time of flight sensors tööstustes. See asub Ortenburg, Saksamaa.
IMM MASCHINENBAU GMBH

Saksamaa

IMM is synonymous with belt grinding machines, polishing machines, bridge saws and expertise proudly Made in Germany. IMM has been leading the field of professional surface processing for more than 60 years. Our products range from manual machines for grinding and polishing right through to automatic systems. We offer comprehensive solutions for customers in the aerospace, automotive, energy and medical technology sectors. At our location in Riederich, we develop and build our systems and drive innovation for the benefit of our customers worldwide. Our machines are made for continuous industrial operation. The heavy and robust design guarantees low-vibration processing. Sales in Germany are predominantly processed in-house. Our customers across the world are supported by more than 25 distributors. IMM Maschinenbau - the solution for your success!

Veebilehe
ROFRA GMBH

Saksamaa

Rofra GmbH develops, produces and markets primary packaging made of tube glass. In our traditional family business, more than 50 committed members of staff produce over 250 million bottles every year for our customers in the pharmaceutical, cosmetics and food processing industry at home and abroad. The name Rofra has become synonymous with reliability and expertise in glass processing. Our strengths lie in the production of customised packaging solutions and our high flexibility in production. For us, service particularly means expert consultation. Using our experience, we support the development of custom packaging solutions and provide form and structure to product ideas using drawings and tools. Our products: Pharmaceutical equipment, glass packaging for the chemical pharmaceutical industry, vials, glass packaging for medical products, glass packaging

Veebilehe

Lehekülg teie ärile

Kas näete seda? Teie potentsiaalsed kliendid näevad samuti Liituge meiega ja tehke ennast europages'is nähtavaks.

Lisa minu äri

SITEC INDUSTRIETECHNOLOGIE GMBH

Saksamaa

As a system partner we develop, manufacture and supply customer-specific production technology worldwide as original equipment manufacturer. Our trademark includes flexible assembly systems, laser systems and systems for electrochemical metal processing for the automotive industry, electrical engineering/electronics, medical technology and alternative energy technology. For years, SITEC systems for the automotive industry have been used to fully automatically assemble and laser process high-pressure pumps, water pumps, oil pumps, shift forks, steering systems, camshaft adjusters, stators/inverters, piston rods and components for battery systems and fuel cells such as cell connectors, battery terminals or bipolar plates. In the field of medical technology, industry-compliant systems for the assembly and, in particular, laser micromachining of membranes, implants and surgical instruments are developed and built. In parallel to mechanical and plant engineering we have been producing assemblies and components for customers in the automotive industry in certified quality according to IATF 16949 for many years. Synergy effects result from our technological competence and tailor-made mechanical and plant engineering.

Veebilehe
KUNSTSTOFFTECHNIK WEISSBACH GMBH

Saksamaa

Our family company has been producing tailor-made plastic solutions since 1991. We now employ 55 people in Gornau, a municipality close to Chemnitz in eastern Germany, in the areas of semi-finished product processing, container and apparatus construction, plant construction and clean room technology. Our solutions are used in sectors such as mechanical engineering and plant construction, medical and environmental technology, the semiconductor industry and photovoltaics. Our company is certified in accordance with ISO 9001: 2008, which demonstrates the high quality of our products and services.

Veebilehe
HQW PRECISION GMBH

Saksamaa

HQW Precision GmbH has its headquarters and production sites in Kürnach, Germany. We specialise in the construction and manufacture of high-end bearings and assemblies which are tailored to meet the needs and requirements of our customers and supplied in a wide range of critical and demanding applications. Industries supplied include the aerospace industry, high-speed machine tool spindles, robotics and critical medical systems. Our products are professionally developed to provide quality, reliability and precision in all cases. This expertise is underpinned by first-class manufacturing and customer service processes at our factory in Germany and branches across the globe.

Veebilehe
EZM EDELSTAHLZIEHEREI MARK GMBH

Saksamaa

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Veebilehe
W. DIMER GMBH

Saksamaa

W. Dimer GmbH is an innovative medium-sized company with over 80 years' experience in the processing of cellulose wadding and foam processing. As a recognised partner among our clients, we develop and produce tailor-made product and packaging solutions made from cellulose wadding/tissue, PUR foams, PE foams, cross-linked PE foams, PA foams and cellular rubber. In addition, we manufacture compound foams, compound foam moulded parts, dental serviettes and absorbent pads for foodstuffs. As a cellulose wadding and foam specialist, we work for customers in a wide variety of industries. These include companies in the pharmaceutical sector, the food industry, medicine and medical engineering, mechanical engineering and tool manufacturing, the automotive industry, electronics industry, filtration technology, transport protection and the furniture industry. Our products are certified in accordance with ISO 9001 (quality management), ISO 14001 (environmental management) and ISO 15593 (food packaging and hygiene management).

Veebilehe

Leidke hinnapakkumisi

Filtrid

Otsingu tulemused

Medical process - Valmistaja Tootja - Saksamaa

Tulemuste arv

10 Ettevõtted